|
attribute
|
function
|
|
Interface type
|
Support FE, GE, 10GE, 25GE Ethernet interfaces;
Support 155M POS, 622M POS, 155M CPOS and other interfaces
E1-F/E1 interfaces are supported
Support AS/ASE (asynchronous serial port), SAE (synchronous serial port) and other interfaces
|
|
Layer 2 protocols
|
Ethernet, Ethernet II, VLAN, 802.3x, 802.1p, 802.1Q, 802.1x, STP (802.1D), RSTP (802.1w), MSTP (802.1s), PPP, PPPoE Client, PPPoE Server, HDLC, FR, DDR, Modem, ISDN, etc
|
|
IP Services
|
TCP, UDP, IP Option, and IP Unnumber are supported
Policy-based routing, Netstream, and sFlow are supported
ECMP is supported
UCMP is supported
|
|
IP applications
|
Ping, Trace, ICMP, DHCP Server, DHCP Relay, DHCP Client, DHCP Snooping, DNS client, DNS Proxy, DDNS, UDP Helper, NTP, and SNTP are supported
|
|
IPv4 routes
|
Static routes
Dynamic routing protocols: RIPv1/v2, OSPFv2, BGP, IS-IS
Routing iterations
Routing policy
Multicast routing protocols: IGMPV1/V2/V3, PIM-DM, PIM-SM, MBGP, MSDP
|
|
IPv6
|
IPv6 ND, IPv6 PMTU, IPv6 FIB, IPv6 ACL, NAT-PT, NAT66, NAT64, IPv6 tunnel, 6PE, DS-LITE are supported
IPv6 tunneling technologies: manual tunneling, automatic tunneling, GRE tunneling, 6to4, and ISATAP
Static routes
Dynamic routing protocols: RIPng, OSPFv3, IS-ISv6, and BGP4+
IPv6 multicast protocols: MLD V1/V2, PIM-DM, PIM-SM
|
|
QoS
|
Supports LR, Port-Based Mirroring, Port Trust Mode, Port Priority, etc
Committed Access Rate (CAR)
Support FIFO, WFQ, CBQ, etc
Supports 5-level HQoS
Generic Traffic Shaping (GTS)
Traffic classification is supported
|
|
Wireless Controller (AC)
|
AP management: AP access, AP configuration parameter delivery, AP version upgrade, AP restart, and AP display
WLAN access, WLAN user security, WLAN user access authentication, WLAN roaming, etc.
Note: MSR3610E-X1, MSR3640-G, MSR3620-G-X3, MSR3610-G-X3, MSR3600-51-G, MSR3600-28-G, MSR3600-51-G-X1, and MSR3600-28-G-X1 do not support built-in ACs.
|
|
Voice
|
Supports FXS/FXO/E&M/VE1/VT1, R2, DSS1, Q.sig, Digital E&M, etc
Support G.711, G.723, G.726, G.729AB, AMR-NB, GSM-FR, iLBC, RT-Audio, etc
It supports rich voice services, voice backup, DTMF transmission support RFC2833, smart dial-up router, 1:1 binding of FXS and FXO, power failure escape, SIP Sever local survival, IVR, etc
|
|
3/4/5G
|
It supports extended 3/4G and 5G extended access, supports 5G NR NSA/SA, and supports TDD/FDD LTE, WCDMA/HSPA+ networks
|
|
Safety features
|
Supports PORTAL, 802.1x, MAC address authentication, and SMS authentication
Local authentication, RBAC, Radius, and Tacacs+
ASPF, ACL, FILTER, domain-based firewall, connection limit, IPS
IKE/IPSec VPN, ADVPN, GDVPN, L2TP VPN, GRE VPN (GRE over IPSec supported)
NAT/NAPT,PKI,RSA,URPF
DDoS attack prevention, ARP attack prevention, and URL filtering are supported
Supports EAD endpoint admission defense
DPI deep packet identification is supported, and service flows are rated and filtered
SM1/2/3/4 algorithms
|
|
SDN features
|
Netconf and Telemetry are supported
Supports VxLAN and EVPN Layer 2 virtual Ethernet links
Segment Routing is supported
It supports zero-configuration deployment of USB flash drive, URL, and DHCP
Segment Routing is supported
EVPN VPWS and evpn VPLS functions are supported
Support for SRv6:
OSPFv3 for SRv6 features
ISIS for SRv6 features
SRv6 Policy feature
SRv6 Policy traffic retribution
EVPN L3VPN over SRv6 feature
EVPN L3VPN over SRv6 Policy
SRv6 Policy traffic statistics feature
SRv6 OAM feature
BFD for SR/SRv6
SRv6 TI-LFA
|
|
MPLS
|
LDP,Static LSP
L3VPN: inter-origin MPLS VPN (Option 1/2/3), nested MPLS VPN, hierarchical PE (HoPE), CE dual homing, MCE, and multi-role hosts
L2VPN: Martini, Kompella, CCC, and SVC
MPLS TE,RSVP TE
|
|
reliability
|
IRF2 is supported
VRRP and VRRPv3 are supported
Supports multi-link load balancing and backup
It supports the linkage function of NQA with routing, VRRP, and interface backup to implement end-to-end link detection and backup functions
BFD fast link detection is supported
Support GR
Support iFIT in-band detection technology
Support RFC2544
|
|
Management & Maintenance
|
SNMP V1/V2c/V3, TR069, SYSLOG, and RMON are supported
Telnet, SSHv1.5/2.0, and FTP are supported
Supports EAA embedded automation architecture
Supports 1588v2 and 1588 ATR/ACR
Command line management, file system management, and dual image are supported
NQA supports DHCP, FTP, HTTP, ICMP, UDP public, UDP private, TCP public, TCP private, SNMP and other protocol tests
|
Your message must be between 20-3,000 characters!
