Send Message
Home > products > Aruba Wireless Access Points >
AP305 Dual Radio Integrated Antenna Aruba Wifi Access Point 2.4GHz 300 Series

AP305 Dual Radio Integrated Antenna Aruba Wifi Access Point 2.4GHz 300 Series

2.4GHz aruba wifi access point

AP305 aruba wifi access point

2.4GHz aruba ap305

Brand Name:

Aruba

Model Number:

AP-305(JX936A)

CONTACT US

Request A Quote
Product Details
Condition:
New And Original
Availability:
Stock
Use:
Wireless WiFi 5
Supported Frequency:
2.4GHz 2x2:2/5GHz 3x3:3 MU-MIMO
Type:
Indoor Access Point
Transmission Standard:
802.11n/ac
Size:
205mm X 205mm X 52mm
Weight:
620g
Product Description
  • ARUBA 300 SERIES WIRELESS ACCESS POINTS
  • AP type: Indoor, dual radio, 802.11n/ac 2x2:2/3x3:3 MU-MIMO Dual Radio
  • The compact Aruba 303 Series AP delivers a maximumAP-300 SERIES SPECIFICATIONS
    • AP-305 (controller-managed) and IAP-305 (Instant):
    --5GHz 802.11ac 3x3 MIMO (1,300 Mbps max rate) and
    2.4GHz 802.11n 2x2 MIMO (300 Mbps max rate) radios,
    with a total of three integrated omni-directional downtilt
    dual- band antennas.
    WI-FI RADIO SPECIFICATIONS
    • AP type: Indoor, dual radio, 5GHz 802.11ac 3x3 MIMO and
    2.4GHz 802.11n 2x2 MIMO
    • Software-configurable dual radio supports 5GHz (Radio 0)
    and 2.4GHz (Radio 1)
    • 5GHz: Three spatial stream Single User (SU) MIMO for up
    to 1,300 Mbps wireless data rate to individual 3x3 VHT80
    client devices
    • 5GHz: Two spatial stream Multi User (MU) MIMO for up
    to 867 Mbps wireless data rate to up to two (1x1 VHT80)
    MU-MIMO capable client devices simultaneously
    • 2.4GHz: Two spatial stream Single User (SU) MIMO for up
    to 300 Mbps wireless data rate to individual 2x2 HT40
    client devices
    • Support for up to 256 associated client devices per radio,
    and up to 16 BSSIDs per radio
    • Supported frequency bands (country-specific restrictions
    apply):
    --2.400 to 2.4835GHz
    --5.150 to 5.250GHz
    --5.250 to 5.350GHz
    --5.470 to 5.725GHz
    --5.725 to 5.850GHz
    • Available channels: Dependent on configured
    regulatory domain
    • Dynamic frequency selection (DFS) optimizes the use of
    available RF spectrum
    • Supported radio technologies:
    --802.11b: Direct-sequence spread-spectrum (DSSS)
    --802.11a/g/n/ac: Orthogonal frequency-division
    multiplexing (OFDM)
    • Supported modulation types:
    --802.11b: BPSK, QPSK, CCK
    --802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
    • Transmit power: Configurable in increments of 0.5 dBm
    • Maximum (aggregate, conducted total) transmit power
    (limited by local regulatory requirements):
    --2.4GHz band: +18 dBm per chain, +21 dBm
    aggregate (2x2)
    --5GHz band: +18 dBm per chain, +23 dBm
    aggregate (3x3)
    --Note: conducted transmit power levels exclude antenna
    gain. For total (EIRP) transmit power, add antenna gain
    • Advanced Cellular Coexistence (ACC) minimizes
    interference from cellular networks
    • Maximum ratio combining (MRC) for improved receiver
    performance
    • Cyclic delay/shift diversity (CDD/CSD) for improved
    downlink RF performance
    • Short guard interval for 20MHz, 40MHz and 80MHz
    channels
    • Space-time block coding (STBC) for increased range and
    improved reception
    • Low-density parity check (LDPC) for high-efficiency error
    correction and increased throughput
    • Transmit beam-forming (TxBF) for increased signal
    reliability and range
    • Supported data rates (Mbps):
    --802.11b: 1, 2, 5.5, 11
    --802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
    --802.11n (2.4GHz): 6.5 to 300 (MCS0 to MCS15)
    --802.11n (5GHz): 6.5 to 450 (MCS0 to MCS23)
    --802.11ac: 6.5 to 1,300 (MCS0 to MCS9, NSS = 1 to 3 for
    VHT20/40/80
    • 802.11n high-throughput (HT) support: HT 20/40
    • 802.11ac very high throughput (VHT) support:
    VHT 20/40/80
    • 802.11n/ac packet aggregation: A-MPDU, A-MSDU
    WI-FI ANTENNAS
    • AP-304/IAP-304: Three RP-SMA connectors for external
    dual band antennas. Worst-case internal loss between
    radio interface and external antenna connectors (due to
    diplexing circuitry): 0.8dB in 2.4GHz and 1.6dB in 5GHz.
    • AP-305/IAP-305: Three integrated dual-band downtilt
    omni-directional antennas for 3x3 MIMO with peak
    antenna gain of 3.9dBi in 2.4GHz and 5.4dBi in 5GHz.
    Built-in antennas are optimized for horizontal ceiling
    mounted orientation of the AP. The downtilt angle for
    maximum gain is roughly 30 degrees.
    --Combining the patterns of each of the antennas of the
    MIMO radios, the peak gain of the effective per-antenna
    pattern is 2.4dBi in 2.4GHz and 2.8dBi in 5GHz.
    OTHER INTERFACES
    • One 10/100/1000BASE-T Ethernet network interface (RJ-45)
    --Auto-sensing link speed and MDI/MDX
    --802.3az Energy Efficient Ethernet (EEE)
    • USB 2.0 host interface (Type A connector)
    • Bluetooth Low Energy (BLE) radio
    --Up to 3dBm transmit power (class 2) and -92dBm
    receive sensitivity
    --Integrated antenna with roughly 30 degrees downtilt
    and peak gain of 2.3dBi (AP-304/IAP-304) or 3.4dBi
    (AP-305/IAP-305)
    • Visual indicators (multi-color LEDs): for System and
    Radio status
    • Reset button: factory reset (during device power up)
    • Serial console interface (proprietary; optional adapter
    cable available)
    • Kensington security slot
    POWER SOURCES AND CONSUMPTION
    • The AP supports direct DC power and Power over
    Ethernet (PoE)
    • When both power sources are available, DC power takes
    priority over PoE
    • Power sources are sold separately
    • Direct DC source: 12Vdc nominal, +/- 5%
    --Interface accepts 2.1/5.5-mm center-positive circular
    plug with 9.5-mm length
    • Power over Ethernet (PoE): 48 Vdc (nominal)
    802.3af/802.3at compliant source
    --Unrestricted functionality with 802.3at PoE
    --When using IPM, the AP may enter power-save mode
    with reduced functionality when powered by an 802.3af
    PoE source (see details on Intelligent Power Monitoring
    elsewhere in this datasheet)
    --Without IPM, the USB port is disabled when the AP is
    powered by an 802.3af PoE source
    • Maximum (worst-case) power consumption: 13W (PoE) or
    12W (DC)
    --Excludes power consumed by external USB device (and
    internal overhead); this could add up to 6.5W (PoE) or
    5.5W (DC) for a 5W/1A USB device
    • Maximum (worst-case) power consumption in idle mode:
    3.7W (PoE) or 2.6W (DC).
  • RF PERFORMANCE TABLE
      Maximum transmit power (dBm)
    per transmit chain
    Receiver sensitivity (dBm)
    per receive chain
    2.4 GHz
    802.11b 2.4 GHz 
    1Mbps 18.0 -95.0
    11Mbps 18.0 -88.0
    802.11g 2.4 GHz 
    6Mbps 18.0 -92.0
    54Mbps 18.0 -74.0
    802.11n HT20 2.4 GHz 
    MCS0/8 18.0 -91.0
    MCS/7/15 18.0 -71.0
    802.11n HT40 2.4 GHz
    MCS0/8 18.0 -88.0
    MCS7/15 18.0 -68.0
    802.11a 5GHz
    6Mbps 18.0 -92.0
    54Mbps 18.0 -74.0
    802.11n HT20 5GHz
    MCS0/8/16 18.0 -91.0
    MCS7/15/23 18.0 -71.0
    802.11n HT40 5GHz
    MCS0/8/16 18.0 -88.0
    MCS7/15/23 17.0 -68.0
    802.11AC VHT20 5GHz
    MCS0 18.0 -91.0
    MCS8 18.0 -67.0
    802.11AC VHT40 5GHz
    MCS0 18.0 -88.0
    MCS9 17.0 -63.0
    802.11AC VHT80 5GHz
    MCS0 18.0 -85.0
    MCS9 17.0 -58.0
  • AP305 Dual Radio Integrated Antenna Aruba Wifi Access Point 2.4GHz 300 Series 0
  • FAQ

  • Q1.What can you buy from us?

          A:Mellanox, Aruba, Rukus, Extreme brand products, including switches, network cards, cables, Access Point, etc.

    Q2.How about the delivery date?

          A:It usually takes 3-5 working days. For specific models, please contact us to check the stock. In the end, the actual                 consultation shall prevail. We will do our best to deliver as soon as possible.

    Q3.What's your warranty terms?

          A: We supply 12 months warranty time.

    Q4.How about the Shipping Method?

          A: We use Fedex/DHL/UPS/TNT and other air shipments,sea shipments are also workable. In one words, we could do any shipments that you wanted.

    Q5.Can I get some samples?

         A:Yes, sample order is available for quality check and market test. You only need to pay the sample cost and express cost.

    Q6.What are your core strengths?

         A:First-hand supply, Original and new products with the favorable price and perfect after-sales service.

Send your inquiry directly to us

Privacy Policy China Good Quality Mellanox Network Switch Supplier. Copyright © 2023-2024 mellanoxnetwork.com . All Rights Reserved.